![]() So, you will want to have the cameras installed in their final location by then. What is the best way to mount the cameras?ĭuring the Startup Wizard, you will be prompted to adjust the motion detection area of each installed camera.If they do, you may need to purchase an additional camera power adapter for that camera. Try plugging the camera directly into the camera power adapter, bypassing the splitter, to see if the LEDs turn on. It is possible that your camera is not receiving enough power for the LEDs needed for Night Vision. Why does my camera stop working at night?.However, Night Owl strongly recommends placing all outdoor cameras under an eave or awning to help shield them from overexposure to the elements, which could reduce your camera’s lifespan. Yes, your cameras are weatherproof and will endure minimal moisture and dirt/debris. After your system is set up, you can disconnect the TV or monitor if you wish. For older systems that use Night Owl Connect, you will need to connect your NVR to a TV or monitor for initial setup. ![]() Does my DVR need to be connected to a TV or monitor?įor devices that use the Night Owl Protect App, this is no longer a requirement as you can set up your system on your mobile device.Your DVR does not require an internet connection for basic operation, but you will need to connect the DVR to your router in order to remotely view your system on a computer or smart device. Does my DVR have to be connected to the internet?. ![]()
0 Comments
Leave a Reply. |